Breadboard Friendly lora DRF1278 with Wire Antenna
10 in stock
This is a Dorji DRF1278F lora module assembled onto a PCB that is breadboard friendly, the pins are on a 0.1″ matrix. The device is fitted with a single 17.5cm wire, suitable for use in the 434Mhz band. This wire antenna is more suited the portable applications where the tracker is fittted inside something, such as a radio controlled model. Take care not to put excessive strain or flexing on the wire. Do not operate the lora device without an antenna. The device is 3.3V logic level only. The pinout of the board is below, the lora device pins on the outside.
These boards were used for the example Arduino sketches in the SX127X lora library that can be found here;